PP RAFFIA
Polypropylene Homo-Polymer Woven Sacks
Product Description:
PP Homo-Polymer RH03 is a natural colored high-performance grade produced with the latest Ineos Gas-Phase polymerization Technology exhibiting the following features:
¸ Very good processability.
¸ Good balance of tenacity & elongation.
¸ Low water carry-over.
PP Homo-Polymer RH03 is recommended for following oriented structures (Stretched Tapes) applications:
¸ Cement Packaging bags
¸ Fertilizer Packaging bags
¸ Food Grain Packaging bags
¸ Bulk Industrial Packaging (FIBC)
¸ General purpose wrapping fabric
Typical Properties:
Properties | Test Method | Units | Values |
Physical Properties | |||
Melt Flow Index ( 230o C & 2.16 kg) | ASTM D1238 | g / 10 min | 3.3 |
Density (23 0C) | ASTM D 1505 | Gm/cm3 | 0.9 |
Polypropylene Homo-Polymer Non-Woven & Fiber
Product Description:
PP Homo polymer RH38 is a natural colored high-performance grade produced with the latest Ineos Gas-Phase polymerization Technology exhibiting the following features:
¸ High Melt flow
¸ Excellent Processability
¸ Very good resin purity & uniformity
¸ Anti-gas fading properties
PP Homo-Polymer RH38 is recommended for
following applications:
¸ Fine denier fibers
¸ Spun bond non-woven
¸ High-speed spinning
Typical Properties:
Properties | Test Method | Units | Values |
Physical Properties | |||
Melt Flow Index ( 230o C & 2.16 kg) | ASTM D1238 | g / 10 min | 38 |
Melt Flow Index ( 230o C & 2.16 kg) | ASTM D 1505 | Gm/cm3 | 0.9 |
H030SG HOMOPOLYMER
FOR WOVEN SACKS AND MONOFILAMENTS
Repo! H030SG is recommended for Raffia Tapes used in making woven fabrics for sacking, carpet backing, industrial packaging and geotextile applications. Repo! H030SG combines good processability on a water bath and chill-roll with excellent mechanical properties. Formulated for low water carry-over.
Typical Characteristics
Property | Test Method | Unit | Typical Value* |
Melt Flow Rate (230°C/ 2.16 kg) | ASTM D 1238 | g/ I 0 min | 3.4 |
Tensile Strength at Yield (50 mm/min) | ASTM D638 | MPa | 34 |