LL ROTO MOLDING
OPAL T3804
GAIL R36 -PATA2
OPAL T3804
Linear Low-Density Polyethylene
Rotational Moulding
Product Description:
LLDPE T3804 is a butene co-monomer based medium density grade produced with the latest Ineos Gas Phase polymerization Technology exhibiting following features:
- Excellent Processability
- High Stiffness & Impact Strength
- Excellent Internal & External Surface finish
LLDPE T3804 is recommended for following applications:
- Overhead water tanks
- Loft tanks
- Storage bins
- Toys and traffic barriers
- Sanitation & Agriculture products
Typical Properties:
Sr. No. Properties Test Method Units Values* | ||||
Physical Properties | ||||
1 | Melt Flow Index ( 190oC & 2.16 kg) | ASTM D1238 | g / 10 min | 4.0 |
2 | Density (at 23 0C) | ASTM D1505 | gm/cm3 | 0.938 |
GAIL R36 -PATA2
R36A050U
Linear Low-Density Polyethylene for Rotomoulding
Product Description and Typical Applications:
R36A050U has excellent processability with good mechanical properties. It is widely used in applications that require low degree of warpage and excellent dimensional control. It is not UV Stabilized and is recommended for use with adequate amount of carbon black or UV stabilizer for outdoor applications. Typical Applications of this grade are chemical tanks, water storage tanks, loft tanks, pallets etc.
Property | Values* | Unit | Test Method |
Melt Flow Index (I2) | 4.5 | g/10min | ASTM D1238 |
Density | 0.936 | g/cc | ASTM D1505 |