High-Density Polyethylene Film Extrusion
High-Density Polyethylene Film Extrusion
Product Description:
HDPE F52H04 is a natural colored grade produced with the latest Mitsui CX slurry polymerization Technology exhibiting the following features:
- Excellent Mechanical Strength
- High Stiffness
- Excellent processability (at High Speed)
HDPE F52H04 is recommended for the following applications:
- Tissue-like films
- Garment/Grocery/merchandise bags
- Disposal waste bags
- Shopping/Counter bags
Typical Properties:
| Sr. No. Properties Test Method Units Values* | ||||
| Physical Properties | ||||
| 1 | Melt Flow Index ( 190oC & 2.16 kg) | ASTM D1238 | g / 10 min | 0.04 |
| 2 | Density (at 23 0C) | ASTM D1505 | gm/cm3 | 0.952 |
F55HM0003N
High Density Polyethylene for Film Extrusion
Application: F55HM0003/F55HM0003N is a blown film high-density polyethylene grade of high molecular weight, possessing bi-modal molecular weight distribution for better processability with excellent mechanical properties. The combination of high strength and excellent draw downability makes F55HM0003/F55HM0003N an ideal material for thin gauge film applications. It is recommended for film applications like, carry bags, shopping bags, trash bags, grocery bags industrial liners etc.
| Property | Values* | Unit | Test Method |
| Melt Flow Index (I2) | 0.09 | gm/10min | ASTM D1238 |
| Melt Flow Index (I21) | 13 | gm/10min | ASTM D1238 |
E45A003
High-Density Polyethylene for Blown Film Extrusion
Application: E45A003 is recommended to use in blend with LD/LLDPE in blown film extrusion for producing co-extruded laminated/ non laminated films for various applications. It has excellent processability with moderate stiffness.
| Property | Values* | Unit | Test Method |
| Melt Flow Index (I2) | 0.6 | gm/10min | ASTM D1238 |
| Density | 0.945 | gm/cc | ASTM D1505 |
E52A003 / E52A003N
High Density Polyethylene for Pipe/Film Extrusion
Application: E52A003/E52A003N is recommended for pipe application like potable water, sprinkler, effluent and waste water systems, cable duct meeting the hydrostatic strength requirements as per IS 4984- 2016 for PE-63 material. The material conforms to natural resin designation PE EAN-C50 T-012 of IS: 7328-1992 and shall meet the same given in IS 4984:2016.
| Property | Values* | Unit | Test Method |
| Melt Flow Index (I2) | 0.22 | g/10min | ASTM D1238 |
| Melt Flow Index (I5) | 0.95 | g/10min | ASTM D1238 |
